Hallo Leute!
Ich benötige eure Hilfe
Ich habe 5 Sonoff Basic und wollte Tasmota drauf flashen.
Funktioniert aber leider nicht. Hier der Debug Bericht:
2018-03-28 09:23:12,489: DEBUG: Current IPs: ['192.168.8.105']
2018-03-28 09:23:53,128: INFO: Using the following configuration:
2018-03-28 09:23:53,128: INFO: Server IP Address: 192.168.8.105
2018-03-28 09:23:53,129: INFO: WiFi SSID: Malik
2018-03-28 09:23:53,129: INFO: WiFi Password: ***************
2018-03-28 09:23:53,130: INFO: Platform: win32
2018-03-28 09:23:53,165: INFO: ** Now connect via WiFi to your Sonoff device.
2018-03-28 09:23:53,165: INFO: ** Please change into the ITEAD WiFi network (ITEAD-100001XXXX). The default password is 12345678.
2018-03-28 09:23:53,165: INFO: To reset the Sonoff to defaults, press the button for 7 seconds and the light will start flashing rapidly.
2018-03-28 09:23:53,166: INFO: ** This application should be kept running and will wait until connected to the Sonoff...
2018-03-28 09:24:15,542: DEBUG: Current IPs: ['10.10.7.2']
2018-03-28 09:24:15,559: DEBUG: ~~ Connection attempt
2018-03-28 09:24:15,559: DEBUG: >> HTTP GET /10.10.7.1/device
2018-03-28 09:24:16,919: DEBUG: << {
2018-03-28 09:24:16,920: DEBUG: "deviceid": "10003621c6",
2018-03-28 09:24:16,920: DEBUG: "apikey": "16bf3832-0ec4-4f88-a5eb-87d87ab4c5a4",
2018-03-28 09:24:16,921: DEBUG: "accept": "post"
2018-03-28 09:24:16,921: DEBUG: }
2018-03-28 09:24:16,922: DEBUG: >> HTTP POST /10.10.7.1/ap
2018-03-28 09:24:16,922: DEBUG: >> {
2018-03-28 09:24:16,922: DEBUG: "version": 4,
2018-03-28 09:24:16,923: DEBUG: "ssid": "Malik",
2018-03-28 09:24:16,924: DEBUG: "password": "***************",
2018-03-28 09:24:16,924: DEBUG: "serverName": "192.168.8.105",
2018-03-28 09:24:16,925: DEBUG: "port": 8443
2018-03-28 09:24:16,925: DEBUG: }
Anscheinend wenn ich mir so ein paar Forums Einträge durchlese ist die neue Firmware drauf.
PS. keines der 5 Stk war jemals mit der EWE app verbunden.
Weiters hab ich noch ein Problem mit einen Sonoff 4CH Pro dort ging das flashen per Tasmota mit Wlan.
kann aber leider immer nur einen Ausgang eingeschaltet lassen.
Sobald ich einen anderen auf ON stelle geht der andere wieder auf OFF
Bitte um HILFE
MFG Gregor